TL-D800S JBOD storage enclosure allows you to back up and expand your QNAP NAS, Windows® and Ubuntu® computers and servers. The TL-D800S features eight 3.5-inch SATA 6Gb/s drive bays and comes with a QXP PCIe card for connecting the enclosure using a SFF-8088 (or SFF-8644) cable. It provides reliable read/write performance for smooth storage and backup tasks.
1. QNAP recommends following the standard procedure for connecting or disconnecting the TL-D800S. For more information, please see the TL-D800S user manual.
2. The TL-D800S can only be used as an individual storage pool or volume on the NAS. Its storage pool or volume cannot be combined into the connected NAS. NAS applications cannot be installed on the TL-D800S.
3. The TL-D800S only supports QNAP NAS running on QTS 4.4.2 (or above) or QuTS hero operating system.
Drive Bay
8 x 3.5-inch SATA 6Gb/s, 3Gb/s
Drive Compatibility
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Audio Alert On/Off Switch
✓
Form Factor
Tower
Host Interface
2 x SFF-8088
LED Indicators
HDD 1-8, Status, Link, Fan error
Buttons
Power switch, enter, select
Dimensions (HxWxD)
188.2 × 329.3 × 279.6 mm
Weight (Net)
6.17 kg
Max. number of HDDs/SSDs supported
8
Hard Drive Type
3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives
Operating Temperature
0 - 40 °C (32°F - 104°F)
Storage Temperature
-20 - 70°C (-4°F - 158°F)
Relative Humidity
5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit
250W PSU, 100 - 240V
Power Consumption: Operating Mode, Typical
51.606 W
Tested fully polulated with Seagate ST6000NM0024 hard drives.
Fan Mode Switch
✓ (Auto, high, medium, low)
Fan
2 x 120mm, 12VDC
System Warning
Buzzer
Kensington Security Slot
✓
TL-D800S JBOD storage enclosure allows you to back up and expand your QNAP NAS, Windows® and Ubuntu® computers and servers. The TL-D800S features eight 3.5-inch SATA 6Gb/s drive bays and comes with a QXP PCIe card for connecting the enclosure using a SFF-8088 (or SFF-8644) cable. It provides reliable read/write performance for smooth storage and backup tasks.
1. QNAP recommends following the standard procedure for connecting or disconnecting the TL-D800S. For more information, please see the TL-D800S user manual.
2. The TL-D800S can only be used as an individual storage pool or volume on the NAS. Its storage pool or volume cannot be combined into the connected NAS. NAS applications cannot be installed on the TL-D800S.
3. The TL-D800S only supports QNAP NAS running on QTS 4.4.2 (or above) or QuTS hero operating system.
Drive Bay
8 x 3.5-inch SATA 6Gb/s, 3Gb/s
Drive Compatibility
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Audio Alert On/Off Switch
✓
Form Factor
Tower
Host Interface
2 x SFF-8088
LED Indicators
HDD 1-8, Status, Link, Fan error
Buttons
Power switch, enter, select
Dimensions (HxWxD)
188.2 × 329.3 × 279.6 mm
Weight (Net)
6.17 kg
Max. number of HDDs/SSDs supported
8
Hard Drive Type
3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives
Operating Temperature
0 - 40 °C (32°F - 104°F)
Storage Temperature
-20 - 70°C (-4°F - 158°F)
Relative Humidity
5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit
250W PSU, 100 - 240V
Power Consumption: Operating Mode, Typical
51.606 W
Tested fully polulated with Seagate ST6000NM0024 hard drives.
Fan Mode Switch
✓ (Auto, high, medium, low)
Fan
2 x 120mm, 12VDC
System Warning
Buzzer
Kensington Security Slot
✓
