TL-D400S JBOD storage enclosure allows you to back up and expand your QNAP NAS, Windows® and Ubuntu® computers and servers. The TL-D400S features four 3.5-inch SATA 6Gb/s drive bays and comes with a QXP PCIe card for connecting the enclosure using a SFF-8088 (or SFF-8644) cable. It provides reliable read/write performance for smooth storage and backup tasks.
1. QNAP recommends following the standard procedure for connecting or disconnecting the TL-D400S. For more information, please see the TL-D400S user manual.
2. The TL-D400S can only be used as an individual storage pool or volume on the NAS. Its storage pool or volume cannot be combined into the connected NAS. NAS applications cannot be installed on the TL-D400S.
3. The TL-D400S only supports QNAP NAS running on QTS 4.4.2 (or above) or QuTS hero operating system.
Drive Bay
4 x 3.5-inch SATA 6Gb/s, 3Gb/s
Drive Compatibility
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Audio Alert On/Off Switch
✓
Form Factor
Tower
Host Interface
1 x SFF-8088
LED Indicators
HDD 1-4, Status, Link, Fan error
Buttons
Power switch
Dimensions (HxWxD)
168.5 × 160.2 × 219 mm
Weight (Net)
3.66 kg
Kensington Security Slot
✓
Max. number of HDDs/SSDs supported
4
Hard Drive Type
3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives
Operating Temperature
0 - 40 °C (32°F - 104°F)
Storage Temperature
-20 - 70°C (-4°F - 158°F)
Relative Humidity
5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit
65W adapter, 100 - 240V
Power Consumption: Operating Mode, Typical
22.985 W
Tested with drives fully populated.
Fan Mode Switch
✓ (Auto, high, medium, low)
Fan
1 x 120mm, 12VDC
System Warning
Buzzer
TL-D400S JBOD storage enclosure allows you to back up and expand your QNAP NAS, Windows® and Ubuntu® computers and servers. The TL-D400S features four 3.5-inch SATA 6Gb/s drive bays and comes with a QXP PCIe card for connecting the enclosure using a SFF-8088 (or SFF-8644) cable. It provides reliable read/write performance for smooth storage and backup tasks.
1. QNAP recommends following the standard procedure for connecting or disconnecting the TL-D400S. For more information, please see the TL-D400S user manual.
2. The TL-D400S can only be used as an individual storage pool or volume on the NAS. Its storage pool or volume cannot be combined into the connected NAS. NAS applications cannot be installed on the TL-D400S.
3. The TL-D400S only supports QNAP NAS running on QTS 4.4.2 (or above) or QuTS hero operating system.
Drive Bay
4 x 3.5-inch SATA 6Gb/s, 3Gb/s
Drive Compatibility
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Audio Alert On/Off Switch
✓
Form Factor
Tower
Host Interface
1 x SFF-8088
LED Indicators
HDD 1-4, Status, Link, Fan error
Buttons
Power switch
Dimensions (HxWxD)
168.5 × 160.2 × 219 mm
Weight (Net)
3.66 kg
Kensington Security Slot
✓
Max. number of HDDs/SSDs supported
4
Hard Drive Type
3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives
Operating Temperature
0 - 40 °C (32°F - 104°F)
Storage Temperature
-20 - 70°C (-4°F - 158°F)
Relative Humidity
5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit
65W adapter, 100 - 240V
Power Consumption: Operating Mode, Typical
22.985 W
Tested with drives fully populated.
Fan Mode Switch
✓ (Auto, high, medium, low)
Fan
1 x 120mm, 12VDC
System Warning
Buzzer
