TL-D1600S JBOD storage enclosure allows you to back up and expand your QNAP NAS, Windows® and Ubuntu® computers and servers. The TL-D1600S features twelve 3.5-inch/2.5-inch SATA 6Gb/s drive bays and four 2.5-inch SATA 6Gb/s SSD bays and comes with a QXP PCIe card for connecting the enclosure using a SFF-8088 (or SFF-8644) cable. It provides reliable read/write performance for smooth storage and backup tasks.
1. QNAP recommends following the standard procedure for connecting or disconnecting the TL-D1600S. For more information, please see the TL-D1600S user manual.
2. The TL-D1600S can only be used as an individual storage pool or volume on the NAS. Its storage pool or volume cannot be combined into the connected NAS. NAS applications cannot be installed on the TL-D1600S.
3. The TL-D1600S only supports QNAP NAS running on QTS 4.5.4 (or above) or QuTS hero h4.5.4 operating system.
Drive Bay
12 x 3.5-inch SATA 6Gb/s, 3Gb/s + 4 x 2.5-inch SATA 6Gb/s, 3Gb/s
Drive Compatibility
3.5-inch bays:
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
2.5-inch bays:
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Audio Alert On/Off Switch
✓
Form Factor
Tower
Host Interface
4 x SFF-8088
LED Indicators
HDD 1-16, Status, Link, Fan error
Buttons
Power switch
Dimensions (HxWxD)
303.84 × 369.89 × 319.8 mm
Weight (Net)
11.59 kg
Max. number of HDDs/SSDs supported
16
Hard Drive Type
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives (for 3.5-inch tray slots only)
2.5-inch SATA solid state drives
Operating Temperature
0 - 40 °C (32°F - 104°F)
Storage Temperature
-20 - 70°C (-4°F - 158°F)
Relative Humidity
5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit
250W PSU, 100 - 240V
Power Consumption: Operating Mode, Typical
93.66 W
Tested fully polulated with Seagate ST6000NM0024 hard drives.
Fan Mode Switch
✓ (Auto, high, medium, low)
Fan
3 x 92mm, 12VDC
System Warning
Buzzer
Kensington Security Slot
✓
TL-D1600S JBOD storage enclosure allows you to back up and expand your QNAP NAS, Windows® and Ubuntu® computers and servers. The TL-D1600S features twelve 3.5-inch/2.5-inch SATA 6Gb/s drive bays and four 2.5-inch SATA 6Gb/s SSD bays and comes with a QXP PCIe card for connecting the enclosure using a SFF-8088 (or SFF-8644) cable. It provides reliable read/write performance for smooth storage and backup tasks.
1. QNAP recommends following the standard procedure for connecting or disconnecting the TL-D1600S. For more information, please see the TL-D1600S user manual.
2. The TL-D1600S can only be used as an individual storage pool or volume on the NAS. Its storage pool or volume cannot be combined into the connected NAS. NAS applications cannot be installed on the TL-D1600S.
3. The TL-D1600S only supports QNAP NAS running on QTS 4.5.4 (or above) or QuTS hero h4.5.4 operating system.
Drive Bay
12 x 3.5-inch SATA 6Gb/s, 3Gb/s + 4 x 2.5-inch SATA 6Gb/s, 3Gb/s
Drive Compatibility
3.5-inch bays:
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
2.5-inch bays:
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Audio Alert On/Off Switch
✓
Form Factor
Tower
Host Interface
4 x SFF-8088
LED Indicators
HDD 1-16, Status, Link, Fan error
Buttons
Power switch
Dimensions (HxWxD)
303.84 × 369.89 × 319.8 mm
Weight (Net)
11.59 kg
Max. number of HDDs/SSDs supported
16
Hard Drive Type
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives (for 3.5-inch tray slots only)
2.5-inch SATA solid state drives
Operating Temperature
0 - 40 °C (32°F - 104°F)
Storage Temperature
-20 - 70°C (-4°F - 158°F)
Relative Humidity
5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit
250W PSU, 100 - 240V
Power Consumption: Operating Mode, Typical
93.66 W
Tested fully polulated with Seagate ST6000NM0024 hard drives.
Fan Mode Switch
✓ (Auto, high, medium, low)
Fan
3 x 92mm, 12VDC
System Warning
Buzzer
Kensington Security Slot
✓
