Kingston's KSM48E40BS8KI-16HA is a 2G x 72-bit (16GB)
DDR5-4800 CL40 SDRAM (Synchronous DRAM), 1Rx8, ECC,
memory module, based on ten 2G x 8-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR5-4800 timing
of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers.
The electrical and mechanical specifications are as follows:
• Power Supply: VDD = 1.1V Typical
• VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• VDDSPD = 1.8V to 2.0V
• On-Die ECC
• x72 ECC (x36, 2 independent I/O sub channels)
• 32 internal banks
• Hard/Soft Post Package Repair
• Sideband access with I3C/I2C
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free
Kingston's KSM52E42BD8KM-32HA is a 4G x 72-bit (32GB)
DDR5-5200 CL42 SDRAM (Synchronous DRAM), 2Rx8, ECC,
memory module, based on twenty 2G x 8-bit FBGA components.
The SPD is programmed to JEDEC standard latency DDR5-5200
timing of 42-42-42 at 1.1V. Each 288-pin DIMM uses gold contact
fingers. The electrical and mechanical specifications are as follows:
• Power Supply: VDD = 1.1V Typical
• VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• VDDSPD = 1.8V to 2.0V
• On-Die ECC
• x72 ECC (x36, 2 independent I/O sub channels)
• 32 internal banks
• Hard/Soft Post Package Repair
• Sideband access with I3C/I2C
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free
This document describes ValueRAM's KVR56U46BS6-8 is a 1G x
64-bit (8GB) DDR5-5600 CL46 SDRAM (Synchronous DRAM), 1Rx16,
memory module, based on four 1G x 16-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR5-5600 timing of
46-45-45 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The
electrical and mechanical specifications are as follows:
• Power Supply: VDD = 1.1V Typical
• VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• VDDSPD = 1.8V to 2.0V
• On-Die ECC
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free
Kingston's KSM48E40BS8KI-16HA is a 2G x 72-bit (16GB)
DDR5-4800 CL40 SDRAM (Synchronous DRAM), 1Rx8, ECC,
memory module, based on ten 2G x 8-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR5-4800 timing
of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers.
The electrical and mechanical specifications are as follows:
• Power Supply: VDD = 1.1V Typical
• VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• VDDSPD = 1.8V to 2.0V
• On-Die ECC
• x72 ECC (x36, 2 independent I/O sub channels)
• 32 internal banks
• Hard/Soft Post Package Repair
• Sideband access with I3C/I2C
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free
Kingston's KSM52E42BD8KM-32HA is a 4G x 72-bit (32GB)
DDR5-5200 CL42 SDRAM (Synchronous DRAM), 2Rx8, ECC,
memory module, based on twenty 2G x 8-bit FBGA components.
The SPD is programmed to JEDEC standard latency DDR5-5200
timing of 42-42-42 at 1.1V. Each 288-pin DIMM uses gold contact
fingers. The electrical and mechanical specifications are as follows:
• Power Supply: VDD = 1.1V Typical
• VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• VDDSPD = 1.8V to 2.0V
• On-Die ECC
• x72 ECC (x36, 2 independent I/O sub channels)
• 32 internal banks
• Hard/Soft Post Package Repair
• Sideband access with I3C/I2C
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free
This document describes ValueRAM's KVR56U46BS6-8 is a 1G x
64-bit (8GB) DDR5-5600 CL46 SDRAM (Synchronous DRAM), 1Rx16,
memory module, based on four 1G x 16-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR5-5600 timing of
46-45-45 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The
electrical and mechanical specifications are as follows:
• Power Supply: VDD = 1.1V Typical
• VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• VDDSPD = 1.8V to 2.0V
• On-Die ECC
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free
