Insta360 X5 Standard Lens Guards

X5 Standard Lens Guards

• Made with reinforced glass to protect your X5 lenses from daily wear and tear.
• Customized to maximize light transparency and picture quality.
• X5 automatically activates Lens Guard Mode.
• Simply twist to install and remove.

Compatibility

• X5

Standard Lens Guards

Convenient protection without compromising on capture quality.

Strong and scratch-resistant.

Reinforced 7H* glass protects your lenses from daily wear and tear.

*Note: Glass strength tested in lab conditions.

High-definition optics.

Customized coating process ensures complete image clarity.

Plug and play.

X5 automatically enters Lens Guard Mode when the lenses are applied to streamline your shooting.

Shoot seamlessly.

The Standard Lens Guards match X5's shooting angle to prevent stitching lines in 360° panoramas.

Twist on, twist off.

Simple rotating design lets you lock in and switch out your lenses easily.

*Avoid using the Lens Guards in wet conditions as their seal is not waterproof.

Notes

1. Do not apply too much pressure when installing or removing a Lens Guard, as this may damage or change the shape of the base.
2. Ensure both Lens Guards are securely installed before using the camera. The notch of each Lens Guard must be aligned with the camera's microphone. If the notch isn't aligned, the camera will not be able to recognize the Lens Guard.
3. Only once the screen-side Lens Guard is installed will the icon display on the camera's status bar and the popup message appear.
4. If you install the Lens Guards while the camera is recording, saving, updating or formatting, the camera will display the status icon but not the prompt.
5. The Lens Guards may slightly affect the camera's stitching ability. To get the best results, point one lens at your subject.
6. Dirty or worn Lens Guards may affect overall image quality.
7. Avoid using the Lens Guards in wet conditions as their seal is not waterproof.
8. If the Lens Guards do get wet, dry each lens thoroughly with a soft cloth to avoid fogging.
9. The Lens Guards contain magnets. Keep them away from pacemakers and other devices affected by magnetic interference.